Remote Shutdown (S/D); Figure 3-19. Remote Shutdown Using Dc Voltage Source - Ametek SPS A Series Operation Manual

AMREL SPS-A Series

REMOTE SHUTDOWN (S/D)

3.9
A remote +12 VDC voltage can be connected externally between
terminals J1-18 (S/D Fault) and J1-24 (COM) to disable, i.e., shut down
the output of the power supply (Figure 3-19). Disabling or opening the
+12 VDC signal will allow the unit to revert to normal operation.

Figure 3-19. Remote Shutdown Using DC Voltage Source

M550129-01 Rev A
Operation
3-25