Physical Characteristics - Ametek SPS A Series Operation Manual

AMREL SPS-A Series
Voltage 5 kW
0-40V 0-125A
0-60V 0-83A
0-80V 0-63A
0-100V 0-50A
0-160V 0-31A
0-200V 0-25A
0-250V 0-20A
0-330V 0-15A
0-400V 0-12A
0-600V 0-8A
0-800V 0-6.2A
*
P-P noise is measured across a 1 uF capacitor at the end of a 6' load cable with the
supply operating at full load and at nominal input line voltage.
**
RMS noise is measured directly across the output terminals with the supply operating at
full load and at nominal input line voltage.
†
Power level not available in 6U chassis. In 3U chassis, these power levels can be
achieved up to 75 kW by paralleling up to five power supplies. Note that paralleling will
increase Ripple and Noise.
††
Models from 10V – 30V not available in 6U chassis.

1.2.4 PHYSICAL CHARACTERISTICS

Dimension 3U Models (10V – 30V) 3U Models (40V – 800V) 6U Models (40V – 600V)
Width 19.00 in (48.3 cm)
Depth 25.65 in (65.15 cm)
Height 5.25 in (13.3 cm)
(4kW, 10V,15V) ≈<65 lbs (29 kg)
(5kW, 20V,30V) ≈<65 lbs (29 kg)
(8kW, 10V,15V) ≈<85 lbs (39 kg)
Weight
(10kW, 20V,30V) ≈<85 lbs (39 kg)
(12kW, 10V,15V) ≈<110 lbs (50 kg)
(15kW, 20V,30V) ≈<110 lbs (50 kg)
M550129-01 Rev A
Amperage
10 kW 15 kW
0-250A 0-375A
0-500A
0-167A 0-250A
0-125A 0-188A
0-100A 0-150A
0-63A 0-94A
0-50A 0-75A
0-40A 0-60A
0-30A 0-45A
0-25A 0-38A
0-17A 0-25A
0-12.5A 0-18.7A
19.00 in (48.3 cm)
25.46 in (64.7 cm)
5.25 in (13.3 cm)
(5kW) ≈ 40 lbs (18 kg)
(10kW) ≈ 60 lbs (27 kg)
(15kW) ≈ 80 lbs (36 kg)
20 kW 25 kW 30 kW
† †
0-625A 0-750
0-333A 0-417A 0-500A
0-250A 0-313A 0-375A
0-200A 0-250A 0-300A
0-125A 0-156A 0-188A
0-100A 0-125A 0-150A
0-80A 0-100A 0-120A
0-61A 0-76A
0-50A 0-63A
0-33A 0-42A
0-25A 0-31.2A 0-37.5A
Overview
Noise** Noise*
RMS
†
20 mV 75 mV
20 mV 75 mV
20 mV 100 mV
20 mV 100 mV
25 mV 150 mV
25 mV 175 mV
30 mV 200 mV
30 mV 200 mV
0-91A
30 mV 300 mV
0-75A
60 mV 350 mV
0-50A
80 mV 500 mV
19.00 in (48.3 cm)
27.06 in (63.8 cm)
10.5 in (26.7 cm)
(20 KW) ≈ 120 lbs (54 kg)
(25 kW) ≈ 140 lbs (64 kg)
(30kW) ≈ 160 lbs (73 kg)
P–P
1-5