Installation; Inspection; Contents Of Shipment - Ametek SPS A Series Operation Manual

INSPECTION

2.1
Inspect the shipping carton for possible damage before unpacking the
unit. Carefully unpack the equipment. Save all packing materials until
inspection is complete. Verify that all items listed on the packing slips
have been received. Visually inspect all exterior surfaces for broken
knobs, connectors, or meters. Inspect for dented or damaged exterior
surfaces. External damage may be an indication of internal damage. If
any damage is evident, immediately contact the carrier that delivered the
unit and submit a damage report. Failure to do so could invalidate future
claims. Direct repair issues to Customer Service at 858-458-0223 (local)
or 1-800-733-5427(toll free).

CONTENTS OF SHIPMENT

2.2
Depending on the model, configuration, and options available for your
SPS-A Series power supply, the ship kit may include additional parts and
accessories. At a minimum, the ship kit that accompanies your SPS-A
Series power supply includes the following items:
•
AMETEK Manuals CD-ROM, Part No. M470007-01, containing this
manual, SPS-A Series DC Power Supplies Operation Manual (Part
No. M550129-01) and the SG Series IEEE 488.2/RS232 Option
and Ethernet Option Programming Manual (Part No. M550129-03)
•
Sense mating connector (Molex P/N 39-01-4031) with loose
contacts (Molex P/N 39-00-0182)
•
J1 mating connector (Cinch P/N DB25P or equivalent) normally
shipped attached to rear panel J1
•
Back shell for J1 (DB25) mating connector (Cinch P/N DCH-B-001
or equivalent)
M550129-01 Rev A
SECTION 2

INSTALLATION

1-1