Configuring Privacy Mask; Configuring Tamper-Proof - HIKVISION DS-7604NI-E1 User Manual

DS-7600 Series NVR User's Manual

Configuring Privacy Mask

Privacy Mask can be setup to mask off sensitive or private areas in the field of view of a camera. To
configure privacy zones:
1. Enter the Privacy Mask menu, shown in Figure 84 by going to Menu > Cameras Setup > Privacy
Mask.
2. Select the camera to setup privacy mask in using the camera dropdown list on the upper left of the
menu.
3. Click Enable Privacy Mask checkbox to enable privacy mask.
4. Up to four privacy masks can be used per camera and are shown using four different colors,
yellow, green, blue and grey. Using the mouse, click and drag out rectangular boxes defining the
desired zones.
5. You may clear a privacy zone at any time by clicking on the corresponding Clear Zone button or
Clear All button to clear all zones.
6. Select the Apply button to save the privacy mask settings and select
menu. Selecting

Configuring Tamper-proof

Tamper-proof detection can be used to recognize if an area of a camera is purposely covered and to
respond accordingly.
To configure tamper-proof detection:
1. Enter the Tamper-proof menu, shown in Figure 85 by going to Menu > Cameras Setup > Tamper-
proof.
Figure 84 Privacy Mask Settings Menu
without clicking Apply will quit out of the menu without saving settings.
.
to return to the previous
86