Configuring Live Feed Displays - HIKVISION DS-7604 Series User Manual

User Manual of DS-7604 Series DVR
Note:
The Lock Main Menu setting is selected by default, meaning the Admin password must be enter to exit
out of the Live Feed into the Main Menu. To change this option and remove the lock to the Main Menu,
visit the Lock Menus menu (See Locking and Unlocking System Menus on page 75).

Configuring Live Feed Displays

Live Feed displays can be customized to your own needs. These settings can be accessed by entering the
Display Configuration menu, shown in Figure 18.
To customize display settings:
1. Enter the Display Configuration menu by going to Main Menu > System Configuration >
Display Configuration.
2. Select the Video Output to configure. You may configure either Main Vout or Auxiliary
Vout.
3. The settings available to configure for each video output includes:

Screen Configuration: Screen configuration of each video output. You may select
between a 1x1, 2x2, 3x3 or 4x4 configuration.

Sequencing Dwell Time: The time in seconds to dwell between switching of
channels when Start Sequence is selected in Live Feed. Selecting Disable Switching
will disable switching in Live Feed.

Enable Audio: Enables/disables audio output for the selected video output.

Output Format: Designates the video output standard.

Device Name/No.: Designates the device name and number of the current unit.

Current Resolution: Designates the resolution of main VGA display.

Mouse Pointer Speed: Pointer speed of the mouse, the higher the amount, the faster
the mouse would move.

Event Output: Output of Event, you can choose Main Vout or Auxiliary Vout.

Event Dwell Time: Configure the dwell time of event, time arrange from 1 second to
10 seconds.
Figure 18. Display Configuration Menu
28