Note:
In order to use auto‐switching of channels, the dwell time must be configured inthe Display Configuration menu.
Note:
After 20 seconds of inactivity, the DVR will automatically exit out of the Displaymenu and go back into the Live
Feed mode.
Note:
The Lock Main Menu setting is selected by default, meaning the Admin passwordmust be enter to exit out of the
Live Feed into the Main Menu. To change this option andremove the lock to the Main Menu, visit the Lock Menus menu
(See Locking andUnlocking System Menus on page 59).
3.3 Configuring Live Feed Displays
Live Feed displays can be customized to your own needs. These settings can be accessedby entering the Display
Configuration menu, shown in Figure 21.
To customize display settings:
Enter the Display Configuration menu by going to Main Menu > System Configuration> Display
1.
Configuration.
Select the Video Output to configure. You may configure either the VGA, MainCVBS or Spot CVBS.
2.
The settings available to configure for each video output includes:
3.
Start/Stop Auto-Switch: Click to start/stop auto‐switch.
Auto‐switch will cyclethrough selected cameras. Switching
ofcamera can be on an individual ormultiple camera basis.
Next Set of Display: Click to view thenext set of display. In
2x2 mode, this willshow the next four display. In 3x3
mode,this will show the next nine display.
Figure 21. Display Configuration Menu
24