Arriva Installation - Rinnai Arriva Operation And Installation Manual

Arriva Installation

Flue and air Unscrew flue access panel, 2 fixing screws are located inside the top left
hose access hand corner of the appliance. Slide panel to the right behind the convection
fan.
Screws
remember to position hose so it can still be accessed once the appliance is
moved into the enclosure. You can do this by tying a piece of string to the
air hose and passing this through the flue access opening. This will allow
the hose to be pulled up into position as required.
Remove clamp holding vertical flue to the upper elbow and remove
upper elbow. Slide vertical pipe fully down into the lower elbow. Remove
horizontal flue pipe from upper elbow.
Flue pipe Connect the horizontal flue pipe to flue and hold in place using appropriate
connection clamp. Failure to secure the flue system using the supplied clamps may
result in a dangerous situation.
Direct A & B flues
rinnai new Zealand Limited
Access
panel
Horizontal flue pipe
Lower
elbow
Arriva Direct Flue Kit
Clamp
Upper elbow
Clamp
Vertical flue pipe
Arriva Adaption
Flue Kit
Flue pipe
Arriva Operation and Installation Manual: 10343-E
32
Clamp
05-10