Rinnai Arriva Operation And Installation Manual page 34

Installing the Log Set
1. Remove the 2 retaining screws that secure the combustion chamber glass panel. Rotate
and lift the combustion chamber glass clear of the combustion chamber and put aside until
needed.
Retaining screws
2. Remove log set, this is made up of 7 pieces as follows:
- Rear main log
- Right hand front log
- Right hand top log
- Right hand bottom log
Left hand
front log
right hand
top log
3. Place the rear main log into the combustion chamber on the rear location pins.
rinnai new Zealand Limited
Glass
panel
right hand
bottom log
Left hand
bottom log
- Left hand front log
- Centre top log
- Left hand bottom log
rear main log
Centre top log
right hand front log
Arriva Operation and Installation Manual: 10343-E
34
05-10