Rinnai Arriva Operation And Installation Manual page 14

Operation Using the remote Control
Preheat
Override
function
Lock OverrideAuto Off Flame
AM
PM
20
Temperature Time
Clock Set
26
Timer 1 Set ON OFF
Timer 2 Set ON OFF
Using Auto Off
Lock OverrideAuto Off Flame
AM
PM
20
Temperature Time
Clock Set
26
Timer 1 Set ON OFF
Timer 2 Set ON OFF
Lock function
Lock OverrideAuto Off Flame
AM
PM
20
Temperature Time
21
Clock Set
Timer 1 Set ON OFF
Timer 2 Set ON OFF
rinnai new Zealand Limited
Automatically functions in conjunction with the timers. When a timer is
selected, the heater may operate anywhere within an hour prior to the
programmed On time.
the preheat function ensures the room reaches the desired temperature
by the programmed on time. This is achieved by sensing the room
temperature one hour prior to start.
Used to manually override the timers so the heater can be operated outside
of the timer settings.
When override is selected 'Override' will be displayed. While in override
mode all remote control functions except for the flame function are
available until the next timer setting is reached.
To return to the timer setting, press the Override button a second time.
If standby/on is pressed during Override the heater will revert to standby
and the timer programs will be cancelled.
This is a energy saving feature designed to control the room temperature
economically. If the room temperature continues to rise when the heater
is thermostatically turned down to its lowest setting the front burner will
turn off leaving only the pilot flame operating. When the room temperature
requires further heating the heater will automatically re-ignite to warm the
room.
to switch the Auto Off function to 'On', press the Auto Off button once,
'Auto Off' will be displayed to confirm the function has been selected. To
switch this off, press the Auto Off button again. The 'Auto Off' will no longer
be displayed on the remote.
This is designed as a child lock function which is a safety feature.
When Lock is pressed all remote control functions will be locked with the
exception of the Standby/On button for the purpose of turning the heater to
Standby only.
The remote control will show 'Lock.
To cancel, hold the Lock button for 3 seconds.
Arriva Operation and Installation Manual: 10343-E
14
05-10