Abnormal Flame Pattern
Each Rinnai Flame Fire has a distinct flame pattern. This should look the same every time you
start your fire, after an initial warm up period of approximately 20 minutes.
Abnormal flame performance and/or pattern can indicate a problem with your fire, such as
blocked gas injectors or artificial logs/burn media have shifted from when the fire was first
installed. There are some warning signs that could indicate a problem.
•
Unusual smell from the appliance
•
Continued difficulty or delay in establishing a flame
•
Flame appears either very short or very long
Normal
•
Flame only burns part way across the burner
•
Severe soot building up on the inside of the glass door
If any of the above signs occur, please call Rinnai to discuss.
rinnai new Zealand Limited
Abnormal
Arriva Operation and Installation Manual: 10343-E
18
05-10