Registering An Optional Cordless Headset (Sb67025 Only) - AT&T Synapse SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Registering an Optional Cordless Headset (SB67025 Only)

You can register one AT&T TL7600 Cordless Headset to a SB67025 Deskset. When a
Deskset has a cordless accessory, the Deskset and headset are all part of the same
extension, and only one device can be used at a time.
The headset must be in the charger, otherwise registration cannot proceed. Even
if the Cordless Headset has been in its charger, remove and replace the Cordless
Headset before you press
To register the TL7600 Cordless Headset:
1. Press MENU, then 2, and then 6.
The Cordless Headset menu appears.
2. Remove and replace the Cordless Headset from its charging base.
3. Press
for the headset.
4. When registration is complete, Headset is registered appears and the Cordless
Headset ON/OFF light turns solid blue.
5. Press CANCEL. The User Settings menu appears.
Deskset Settings
. Registration in Progress... appears while the Deskset searches
Register
Registration can be terminated by pressing CANCEL on the Deskset.
If the Cordless Headset is registered to another Deskset, it must be
deregistered first. See "Deregistering a Cordless Headset" on page
121
on the Deskset.
Register
Back to Contents
122.