Using The Call Log - AT&T Synapse SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Using the Call Log

The Call Log soft keys, as shown in Figure 30 and described in Table 17, are available
whenever the Call Log has at least one entry.
1. Name and number
2. NEW
3. Voicemail message available for
playback.
4. Current Call Log entry number/
total number of entries
Table 17. Call Log Soft keys
Key
PlayMsg
CallBack
ClrNew
The voicemail message icon
The icon remains until you delete the message. An ! icon indicates the message is new.
If your company has caller ID, the caller information appears. If the caller ID information
is absent because it is unavailable, UNKNOWN NAME and UNKNOWN NUMBER
appear. If the caller chooses not to send the information, PRIVATE NAME and PRIVATE
NUMBER appear.
Call Log
1
Figure 30. Call Log Functions
Description
Plays message. Appears only
when there is a message.
Dials the entry.
Clears [NEW] indication from
the displayed entry.
appears in call entries where the caller left a message.
90
4
3
2
The Ring Group name can also appear here.
Indicates call was not answered and has not
been reviewed.
Exclamation mark (!) indicates message is new.
A Ring Group or Call Queue icon can also appear
here. The voicemail icon replaces other icons
when both would apply.
50/50 maximum.
Key Description
Deletes the entry.
Delete
Stores number in your
Store
Personal list.
Deletes all entries.
DelAll
Back to Contents