Cordless Accessory Registration And Deregistration Time-Out - AT&T Synapse SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Cordless Accessory Registration and Deregistration Time-Out

If the cordless device is registered to another Deskset or telephone, it must be
deregistered first. See
For security reasons, the registration process on both SB67025 Deskset and cordless
accessory terminates after the time-out period of two minutes if registration is not
successful.
If the registration process times out on the cordless accessory, the cordless accessory
resets itself. The Deskset returns to the unregistered cordless accessory startup screen.
If the registration process times out on the Deskset, it displays Registration Failed and
returns to Idle mode.
If Cordless Headset registration fails, the ON/OFF light on the headset flashes twice
every five seconds. To reset the headset, remove the headset from the charger and try
the registration process again, beginning with Step 1,
Headset:" on page
Deskset Settings
"Deregistering a Cordless Headset" on page
121.
123
Back to Contents
122.
"To register the TL7600 Cordless