Sending A Page - AT&T Synapse SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Sending a Page

You can start sending a page from the Paging Zones screen. If your system
administrator has set up Paging Zones, you can page all extensions or a zone.
To send a page:
1. Lift the handset or press SPEAKER, and then press
OR
Call Appearance mode — Press MENU, then 1, and then 3.
Line Appearance mode — Press MENU, then 1, and then 2.
The Paging Zones screen appears. The screen shows the page options available to
your Deskset.
2. Highlight All Extensions or a Paging Zone.
3. Press SELECT. The system emits a short paging tone and the Page screen appears.
OR
Press CANCEL to return to the idle screen.
4. Speak into the speakerphone or pick up the handset to speak.
5. When finished, press
The Idle screen appears.
At the extensions being paged:
Desksets involved in active calls, listening to a message, or playing or recording

a name or greeting do not receive pages.
The PAGE programmable feature key (key #4 by default) flashes.

Press the VOL+ or VOL– keys to adjust the volume. This volume setting affects

current and future incoming pages only.
Lifting the handset interrupts the page. The PAGE key continues to flash.

Paging
3DJLQJ =RQHV
 $OO ([WHQVLRQV
 $FFRXQWV
 0DQDJHP HQW
3DJLQJ $OO ([WHQVLRQV
EndPage
or CANCEL, hang up the handset, or press SPEAKER.
EndPage
96
Back to Contents
.
Page