Belt Clip & Optional Headset - AT&T E2912B User Manual

Getting started
Belt clip & optional headset
Install belt clip as shown below if desired.
Snap belt clip
into notches
on both sides
of handset.
For hands-free telephone conversations, use any industry standard 2.5 mm head-
set (purchased separately). For best results, use an AT&T 2.5 mm headset.
Plug 2.5 mm headset into
the jack on the side of
handset (beneath small
rubber cap).
To release belt clip
from handset, lift one
side of the belt clip
out of the notch.
NOTE: If the sound quality of the
headset is not good, try unplugging it,
and firmly plugging it in again.
10