RC3 Switching over the remote control for operating equipment of other manufac- turers or for a Loewe DVD player Using the drive buttons for VCR, DVD or for Digital Recorder Plus Switching over the remote control –...
Remote control – TV functions Control LED for programming the remote control Change-over switch for operation of TV, VCR, DVD recorder/player or Set Top Box Sound off/on (mute) Timer overview Video operation with video operating lin on/off Set picture format Call menu /in menu: back Teletext mode on/off P+/P–...
Control panel Operating indicator On/Off key Standby indicator — AV-S V IN AUDIO Channel up/down Video input AVS Audio input /in a menu: adjust (Y/C, CVBS) (white=left, red= right) To display menu Headphones socket Video input AVS (CVBS) Press here to open and close the control panel BAQ2550H_31310_021_4_GB 22.07.2004, 10:15 Uhr...
RC5/RC6 SERVICE Connection for IR link CTRL VHF/UHF AUDIO IN AUDIO VHF/UHF Connection for subwoofer in the stand, Loewe active loudspeaker systems or Home Automation Sockets for video recorder, DVD, decoder etc. (Euro-AV) DIG IN Digital tone inputs DIS module...
With the remote control, you can operate three Loewe units, this TV, a Loewe video recorder and a Loewe DVD player. BAQ2550H_31310_021_4_GB TV equipment This operating manual describes the maximum equipment.
For your own safety For your own safety and in order to avoid unnecessarily damaging your TV set, please read and observe the following safety instructions: • This TV set is designed exclusively for re- ceiving and reproducing audio and visual (AV) signals.
BAQ2550H_31310_021_4_GB We recommend you to use only original parts, e.g. Loewe racks and stands. If the TV set is placed on a console with castors, move the console carefully because the console and the TV could tip over. Con-...
You then see a list of the stored stations in which you can mark your favorites. Finally log in your video recorders, decoders, Loewe audio system and Home Automation with the connec- tion wizard and connect these to the TV set according to the illustrated connection plan.
Daily handling Switching on/off Your TV set is equipped with an eco-standby power supply unit. The power consumption drops to low power in standby mode. If you want to save even more energy, switch the set off with the On/Off switch. However, please note that EPG data are then lost and timer recordings programmed on the Digital Recorder set will not be carried out.
Daily handling General menu operation With the TV and picture menus, we show you how to navigate within the menus. Which buttons you can use for operation is shown at the bottom of the appropriate menu. Call the TV menu TV menu Mark Standard settings...
TV. If it is a question about the operation, you have direct access to the operat- ing function from the index. Loewe TV sets are supplied in different models with different equipment. You can find out what equipment your TV has under the menu item ”Technical spec.
Modes of operation Picture in Picture (PIP) Standard PIP functions: In standard PIP, a PIP picture is displayed in the current TV picture. The frame round the PIP pic- ture is initially green in standard PIP. Show/hide PIP picture PIP picture as still frame The frame around the PIP picture must be green.
Modes of operation EPG mode EPG is the electronic station guide for TV pro- grams. With this system, you can easily find the programs that interest you (sorted according to time, day, topics and programs). You can memo- rize programs and program recordings. A wizard is activated the first time you use EPG (not with DVB) which guides you through the necessary settings.
Page 15
Modes of operation EPG settings If you want to change the provider or want to have other programs evaluated, you can do this in the EPG menu. Provider search EPG on/off Call EPG menu EPG menu List of memorized stations Select provider/program Favorite programs Select personal topics...
Modes of operation Teletext mode Teletext transmits information such as News, Weather, Sport, Program Previews and Subtitles. Teletext on/off 1OO 1OO ARD-Text O1.O7.O1 1O:3O:42 ARD-Text Teletext im Ersten Letzte Meldung: Libyscher Botschafter in London schließt Entschädigung für Lockerbie-Opfer nicht mehr aus Fußball: Rolf Hüssmann soll neuer Sportdirektor beim VfB Stuttgart...
You should have defined a few personal teletext pages. In all these cases you then have a useful selection. No LOEWE dialog is displayed with NTSC recep- tion. You call the LOEWE Dialog with the arrow buttons on the remote control when no menu is displayed.
The VCR’s must be connected to the Euro AV sockets (Scart) and logged in under the ”Connections” menu. Digital Link must be switched on on the Loewe video recorder. Only then can you use the con- trol bar. You also need Digital Link or Digital Link Plus for timer recordings of satellite programs controlled by the TV set.
Page 19
Logging in equipment You have already logged in and connected all connected devices (video recorders, camcorders, DVD player, DVD recorder, Loewe audio system, Pay-TV decoders, Loewe home automation, door intercom) with the connection wizard when you put it into operation for the first time. If you want to connect further or different devices, you have to call the connection wizard in the TV menu –...
”Yes” in the TV menu). Then the VCR picture is shown on the current station slot as in Digital Link Plus VCR’s. 2. You can also control logged-in Loewe VCRs and DVD players with the video menu bar. See page 18 for more details.
Default options are Loewe video recorders, Loewe DVD recorders and the d-box common in Germany for STBs (Set Top Box). For operation of a Loewe DVD player the remote control must be switched over (see next column). Use the drive buttons in TV- and STB...
DVD recorder/player Turn the rotary switch to ”DVD”. At the factory the infrared code and the func- tionality is preset for the Loewe DVD recorder, see previous page for how to switch over to the DVD player. Functions for the Loewe DVD player...
Page 23
The ”Stations” item in the TV menu and the ”Autom. channel search” item in the main infor- mation cannot be called Control of the Loewe VCR with the video control bar and the timer does not work or does not work properly...
Page 24
(decoder, TV or Autom.), see instruc- tions of the decoder a) Change the setting to ”TV” b) Either a dummy plug with bridges, Loewe Concertos, the transmitter for the home auto- mation or a subwoofer must be plugged into...
Audio IN Jack 3,5 mm IR-Link OUT Jack 2,5 mm RC5/RC6 OUT D-Sub 15-pole VGA IN 9-pole cube socket home automation or Loewe active loudspeaker system Mini-DIN 8-pole Service/audio system (L-link) Cinch Centre OUT Centre Signal Cinch Subwoofer OUT LFE Signal...
IR Link. Loewe audio systems and active loudspeaker systems A combination of a Loewe TV set, a Loewe audio system and a Loewe loudspeaker system pro- vides an excellently adapted Home Cinema system with the advantages of high operating comfort, matching design and adapted technol- ogy.