Table of Contents
Advertisement
Art 32
Quick guide
Operating controls on the TV set / Preparing the TV set
Functions of the operating controls
8
-
3
1
Mains switch:
The mains switch is located on the bottom of the set.
Always return the TV set to Standby mode before switching it off
with the main switch.
The TV set will be completely separated from mains only when
you unplug the mains cable.
2
On/Off key:
Switching on in standby mode
Switching off to the standby mode
3
IR receiver:
Infrared receiver for receiving the remote control commands.
4
Display:
white:
Standby
white, intermittent: TV set starts
green:
TV set switched on
red:
timer recording active
blue:
TV set in standby, background operation
active (EPG data updating)
8
5
1
M
4
7
+
2
R
6
5
Key M:
Call direct control on TV set
in direct control on TV set: up
6
Key R:
Toggle TV mode and radio mode
Direct control on TV set: down
7
Key +:
Station up
Direct control on TV set: to the right
8
Key – :
Station down
Direct control on TV set: to the left
Preparing the remote control unit
Inserting or replacing batteries
Press on the embossed arrow whilst pushing the battery cover down.
Only use leak-proof micro-cells of the LR 03 (AAA) Alkali-Manganese
type. Do not use different types of batteries and old and new batter-
ies together.
The batteries used must not be exposed to excessive heat such as
sunlight, fire or similar!
Pay attention to the correct polarity of + and – when inserting the
batteries.
If the batteries are too weak after longer use, the TV set prompts you to
change the batteries. Dispose of used batteries in an environmentally
friendly way (see page 29).
Push the cover back on from below after having inserted the batteries.
Adjusting the remote control unit for operating the TV set
Press the TV key.
Advertisement
Table of Contents
