Error Messages - Oce TDS400 User Manual

Error messages

Error messages
Error messages
Copy too late
Remove paper
Press <on-line>
Speed failure
Remove paper
Press <on-line>
Knife 1 error
Remove paper
Press <on-line>
Knife 2 error
Remove paper
Press <on-line>
Roll retract err
Press <on-line>
Roll init error
Open roll unit
Press <on-line>
Input too late
Open roll unit
Press <on-line>
Deposit error
Press <on-line>
Illegal language on
controller
using UK English
Press <on-line>
Close roll unit
Rewind paper
Press <on-line>
44 Océ TDS400 User Manual
Explanation
The copy is too late at the paperpath output sensor
Remove the print material.
A paper jam occurred.
Remove the paper jam and press <on-line>
An error occurred during the cut of the roll.
Check the paper in the roll unit and remove if necessary.
Press <on-line>.
An error occurred during the cut of the roll.
Check the paper in the roll unit and remove if necessary.
Press <on-line>.
Print material error when the roll unit takes back the material.
A sensor of the roll unit is activated when power is applied to the
printer.
Open the roll unit.
Guide the paper to the marker (see 'Feed the material' on
page 155.
Press <on-line>
The input sheet is too late.
Open the roll unit
If necessary, withdraw roll and rewind
Press <on-line>
An error in the compact output stacker occurred.
The compact output stacker stops.
The print process continues.
Press <on-line>.
The controller has an illegal language.
The controller uses the English language instead of the selected
language.
Call service.
Press <on-line>
While you printed, the roll unit opened.
Rewind the paper.
Close the roll unit.
Press <on-line>