Copy Jobs - Oce TDS400 User Manual

Copy jobs

Your printer system has a 1 roll or 2 roll unit. Use the Media key, on the scanner
operator panel, to select a roll, or to select the manual feed on the printer.
You must set the media type on the printer.
Note:
You can make 1:1 copies and you can decrease or increase your original from
25% to 400%. You can set the zoom value in fixed steps or in% steps. The
default zoom is set in the Océ Settings Editor.
The Océ TDS400 cuts the paper to the length of the original, the synchro cut.
If you select the standard cut mode, the copy is cut at a standard length, (see
'Set synchro or standard cut' on page 64).
The automatic exposure gives background-free copies from most
line-drawings. Select the correct original type if you have an extremely dark or
light original, or an original with pasted parts or photographs (see 'The
exposure settings' on page 58).
With the Océ TDS400 you can do a number of basic tasks. These tasks include:
Turn on, turn off the scanner
Make copies
Select the required media
Select the manual feed
Specify the zoom factor
Select the exposure setting
Select to add or remove a strip
Select the input mode
Select the output mode
Select extra settings
Deliver originals after scanning
Define settings for the next original
Select autofeed of the original
Stop a copy job
52 Océ TDS400 User Manual