Cancel A Print - Oce TDS400 User Manual

Turn off the printer
Set the ON/OFF switch at the rear of the printer to position '0' (see Figure 4).
1
Attention:
you lose information or that a paper jam occurs.
Turn on the controller
Press the key on the front of the controller.
1
Turn off the controller
Select the 'Shut down' option from the Océ System Control Panel. You can do
1
this through both the controller and through Océ Remote Logic®.
Switch off the controller and the monitor.
2

Cancel a print

Cancel a print before you start the print or during the print.
Cancel a print
Press the Stop key.
1
The printer stops.
When the printer runs, the paper is cut.
The paper is always ejected.
28 Océ TDS400 User Manual
If you switch off the printer during a print job, it is possible that