Oce TDS400 User Manual page 87

[20] 'Destination properties' window
Enter a logical name for the destination in the 'Name' text box.
3
This logical name also appears on the scanner panel S.
Select the 'On the controller' type from the 'Type' drop-down list box.
4
Enter a path of the target folder in the 'Path' text box. You can also click the
5
'Browse' button to select the path.
This is only possible if you select 'On the controller' as 'Type' (see
Note:
step 4).
Click Ok to accept the destination properties.
6
Create a network destination with SMB
Create a shared folder on a workstation. For example c:\Scan
1
On the Océ Scan Manager Open the 'File' menu and select 'New' or click on
2
the 'New' button on the toolbar (see Figure 19).
The Destination Properties dialog box appears (see Figure 20)
Select SMB from the 'Type' drop-down list box.
3
Enter the system name of the workstation where you created the shared folder.
4
Find the system name of the workstation on the control panel of the
Note:
workstation (Control panel - Network - Identification - System name)
Enter the path name. This is the name of the shared folder on your workstation.
5
For Windows NT® , Windows® 2000 and XP, use the DOS name of the shared
folder.
For Windows 95/98® use the folder name. This is case sensitive.
You can not Browse. Instead of entering the path name by hand, you
Note:
can use the drop-down list box to select a shared folder available on the
selected system.
If you have set a username and a password for the shared folder on the
6
workstation, then enter the username and the password in the required fields.
Using the Océ TDS400 to Scan-to-file 87