Oce TDS400 User Manual page 113

In order to perform special System Administrator functions, you must log on
to the Océ Settings Editor as a System Administrator (see 'User modes' on
page 137).
When you are finished, make certain you log off from the System
Note:
Administrator mode of the Océ Settings Editor to prevent unauthorized use of
the Océ TDS400.
Make System Administrator settings in the Océ Settings Editor
Maximise the Océ Settings Editor on the screen.
1
Log on as System Administrator.
2
See 'User modes' on page 137 for more information about logging on to the
Océ Settings Editor.
Click on one of the top buttons to display the desired group of settings.
3
Select the setting you want to update in the tree structure.
4
Update the setting in the update area, as required.
5
A few settings, such as the default pen settings, are made directly
Note:
from the tree structure area.
Click on the 'Apply' button.
6
The new value is now applied for the setting
Log off from the System Administrator mode when you are finished updating
7
settings.
Océ Power Logic®: The Settings Editor 113