Belt unit
A belt unit offers a large capacity and more flexibility. On the belt unit up to
75 A0 prints can be delivered offset stacked. You can adjust the side guides of
the belt, depending on the width of the folded package.
Set the belt as folded output delivery
Press the On-line key on the printer operator panel.
1
Select 'Folding' with the
2
Press the
3
Select 'Delivery' with the
4
Press the
5
Select 'Belt'.
6
Adjusting the side guides of the belt
Loosen the nuts (see Figure 124).
1
[124] Adjusting the side guides of the belt
Adjust the plate in accordance with the width of the fold package.
2
Tighten the nuts.
3
The folder
or
key to enter the 'Folding' menu.
or
key to enter the 'Delivery' menu.
key.
key.
203