Instructions For Safe Use - Oce TDS400 User Manual

Instructions for safe use

Océ designed products have been tested in accordance with the strictest
international safety standards. To help assure safety while working with these
products it is important that you observe the following safety rules:
Maintenance
Do not remove any screws from fixed panels.
Do not carry-out maintenance activities except for the parts and maintenance
materials mentioned in this manual.
Do not place any liquids on the machine.
Use maintenance materials or other materials for their original purpose only.
Keep maintenance materials away from children.
Do not mix cleaning fluids or other substances.
To avoid the risk of introducing hazards, all modifications to Océ equipment
are strictly reserved for properly qualified and trained service technicians.
Connection
If for some reason you have to move the machine yourself, please make sure
that the main power point has the right fuse capacity. See the Océ TDS400
safety data sheet in this appendix for information about maximum current.
Do not bridge any mechanical or electrical circuit breakers.
Do not use an extension lead to connect the machine.
This equipment has not been designed for connection to an IT power system.
(An IT power system is a voltage network in which the neutral wire is not
connected to earth).
For equipment connected via a wall socket: locate the machine close to a wall
socket that is easily accessible.
For equipment connected via a fixed connection to an electricity grid: the
disconnect device in the fixed connection should be easily accessible.
222 Océ TDS400 User Manual