Destinaspbtion; Checkprint; Resolution - Oce TDS400 User Manual

Destinaspbtion

You can store your scan either in the temporary store on the controller or on a
network destination. You can define up to six destinations in the Océ Scan
Manager application. On the scanner operator panel you can choose one of
these destinations.
Select a destination
Press the Extra key.
1
Select 'Destination' with he
2
Press the
3
Select the needed 'Destination' with he
4
Press the Confirm key.
5
The names of the destinations can be any. However, for your
Note:
convenience, you are able to define understandable nicknames in the Océ Scan
Manager application (see 'Create a local destination' on page 86).

Checkprint

A Checkprint is a print from the scanned original. You can turn Checkprint on
or off.
Select Checkprint
Press the Output key to select 'file'.
1
Press the Extra key.
2
Select 'Checkprint' with he
3
Press the
4
Select 'on' or 'off' with the
5
Press the Confirm key.
6

Resolution

The Océ TDS400 Scan Logic® option can scan three resolutions:
200 dots per inch (dpi)
300 dpi
400 dpi
To reach the best print quality on the Océ TDS400 select 300 dpi.
78 Océ TDS400 User Manual
or
key, to enter the 'Destination' menu.
or
key, to enter the 'Checkprint' menu.
or
key.
or key.
key.
key.