Oce TDS400 User Manual page 193

[118] Situation A: No mechanical errorSituation B: Mechanical error
If there are, remove the tape strips in the reinforcement unit.
4
If the protection sheet is not on the reinforcement strip (see situation
Note:
A in figure 118), there is no mechanical error and you should insert a new
tape roll as described in 'How to insert a new tape roll' on page 165. If this
error frequently occurs you should call Customer Service.
Remove all tape between the rollers and knives (see Figure 119).
5
[119] Removing the tape
Lead a new trailing strip of tape between the rollers and knives. For more
6
information see 'How to insert a new tape roll' on page 165.
Troubleshooting 193