Oce TDS400 User Manual page 211

Océ Remote Logic® software
Software Application
Océ Queue Manager
Océ System Control
Panel application
Océ Settings Editor
[128]
Scanner
Model
Technology
Speed
Original feed
Originals
Maximum thickness
Exposure control
Media selection
Reproduction scale
Input mode
Other operating functionsConcurrent scanning and printing
Functionality
Image editing
Dimensions
Weight
[129]
Functionality
view status for each job and cancel, hold and restart the en-
tire job
view status and settings of system components
change system settings
Free-standing console
CCD, Océ Image Logic® real-time image processing hard-
ware
3 linear metres per minute or approximately 2 A0s per
minute
Face down, right aligned
Automatic feed off/on
Rewind original to front off/on
A4 to A0 sizes and 36", up to 15 metres.
1 mm
Automatic background compensation, manual fine adjust-
ment.
Special modes: Lines & Text, Photo, Blueprint
Manual selection of roll 1 or 2 or manual feed.
Zoom: 25% - 400% (adjustable in 1% programmable fixed
steps)
Scan-to-file zoom: 50% - 200%
Single sheet
Set (sets processing/set collation)
Multi-copy mode: 1-99 copies (scan once, print many)
Pre-programming of next job
Programmable default settings
Standard cut, synchro cut
Scan-to-file (option)
Leading and trailing strip adjustment (remove 400 mm, add
400 mm)
Image mirroring
1240 mm (W) x 1105 mm (H) x 615 mm (D)
65 Kg
211