Settings To Scan - Oce TDS400 User Manual

Settings to scan

Press the Extra key on the scanner operator panel to access the settings to make
a scan. The following options are available in the 'File' menu:
You can store your scan either in the temporary storage on the
Destination
controller or you can store it on a network destination. You can define a
maximum of six destinations in the Scan Manager application. You can select
one of these destinations on the scanner operator panel.
A Checkprint is a print from the scanned original. You can turn the
Checkprint
checkprint on or off.
The Océ TDS400 Scan Logic® option can scan three
File resolution
resolutions: 200, 300 or 400 dots per inch (DPI). The higher the resolution, the
better the image quality. Higher resolution also causes larger file size.
To define the internal order of the scanned files, select between
File format
TIFF (Tagged Image File Format), CALS-I (Continuous Acquisition and Life
Cycle support), or PDF (Portable Document Format).
Select this option to decrease the size of the file or to get good
Optimize size
quality.
Set the scan size In the 'Original' menu.
Using the Océ TDS400 to Scan-to-file 77