GRAPHTEC CS500 User Manual page 21

2. PREPARATION
Rear View
IEEE 1394
connector
USB
connector
CS500-11 CS500-11PRO
IS200-11 IS200-11PRO
Ethernet
connector
USB
connector
CS500-11eN CS500-11eN-PRO
IS200-11eN IS200-11eN-PRO
Power switch
Controls the on/off status of the power supply to the scanner.
AC line inlet
Connect the power cord's female plug here.
USB connector
Used to connect the USB interface cable.
IEEE 1394 connector
Used to connect the IEEE 1394 interface cable.
Ethernet connector
Used to connect the Ethernet cable.
The USB and IEEE 1394 connectors cannot be used at the same time. Do not connect
both the USB and IEEE 1394 cables to a computer, or to two separate computers,
at the same time.
2 – 8
The above illustration is of the CS500 model.
Power switch
AC line inlet
CS500/IS200