GRAPHTEC CS500 User Manual page 24

(2) Press the other end of the document support wire towards the end already inserted,
and then insert it into the corresponding slot. As with the first end, insert the other
end of the wire so that it fits into the hidden slot on the lower level.
(3) Insert the center part of the document support wire into the elongated slot.
(4) Attach the other document support wires in the same manner.
Detach the document support wires when moving or packing the scanner. Squeeze
each wire gently towards the center and then lift it up to detach it.
CS500/IS200
Document support wire end
Hidden slot on the lower level
2. PREPARATION
2 – 11