GRAPHTEC CS500 User Manual page 64

5. DAILY MAINTENANCE
• The next reference point to be checked is displayed on the Status bar.
• If you click in error, click the Esc. key to cancel the operation and return to the immediately
previous step.
• If you click on the wrong tile, color correction will not be performed correctly and the
colors of the image displayed after color correction will be incorrect.
(7) After you have clicked tile number 6, click the Set button.
Click the [OK] button.
(8) To check the color correction results, click the Confirm button.
(9) The following message is displayed. Insert the color correction sheet in the scanner as
instructed.
Position the color correction sheet so that the red bar in the center of the sheet is centered
in the scanner (but with the printed side down).
(10) Click the [OK] button to start scanning.
After scanning has been completed, an enlarged view of the color-corrected data is
displayed.
(11) Click the Fit icon to display the entire image, and check whether there is any discrepancy
in color. If there is no discrepancy, color correction is complete. Click the Close button.
If there is still some color discrepancy after performing Color Correction, repeat steps
(6) through (11).
5 – 12 CS500/IS200