Connecting The Ag 5000 To The Customer's Network - Nomadix AG 5000 User Manual

AG 5000

Connecting the AG 5000 to the Customer's Network

Use this procedure to connect the AG 5000 to the customer's network (after the start
up configuration parameters have been established).
Choose an appropriate physical location that allows a minimum clearance of 4cm
1.
either side of the unit (for adequate airflow).
Connect the AG 5000 to the router, then connect the AG 5000 to the customer's
2.
subscriber port.
Rear Panel
Subscribers
Connect the power cord and turn on the AG 5000.
3.
Go to "Establishing the Basic Configuration for Subscribers" on page
4.
Installing the AG 5000
To
To
Network
52.
51