Nomadix AG 5000 User Manual page 100

From the Cascading Support screen, you can return to the main Port-Location
Settings screen at any time by pressing the
Click on the
7. Submit
you want to reset all the values to their previous state.
In Room Port Mapping
This section shows In Room Port Mapping from the subscriber side, when the In
Room Port Mapping feature is enabled.
AG 5000 multiple VLAN tagged systems can use the same tags and be
placed on different Subscriber ports. Although it is technically possible
to place two different VLAN tagged switches (one on each Subscriber
side) that have the same VLAN tags designated, this configuration can
cause problems. To avoid conflicts, you must ensure that the VLAN tags
are different on the different devices.
Enable
1. In Room Port Mapping
previous section, Steps 2 and 3).
Enter the following URL target format:
2.
http://(AG 5000 IP address):1111/usg/roommapping
For example:
http://219.57.108.103:1111/usg/roommapping
The Enter Network Password prompt appears:
Click here if you want to save
96
Back
button to save your changes, or click on the
and assign a user name and password (see
AG 5000
button.
button if
Reset
Enter user name and
password
System Administration