Nomadix AG 5000 User Manual page 82

Enter the starting and ending IP addresses for the DHCP address pool you want
11.
to use:
DHCP Pool Start IP
DHCP Pool Stop IP
Enter the
12. DHCP Lease Minutes
Select
13. Public Pool
A "public" IP address will not be translated by DAT.
If required, make this an
14.
appropriate boxes.
Do not allow pools to overlap.
When finished establishing your DHCP Pools, click on the
15.
Configuration Page
You must now reboot the system for the new settings to take effect. Click the
16.
check box for
Reboot after changes are saved?
button to save your changes and reboot the system, or click on the
you want to reset all the values to their previous state.
When the system restarts, DHCP is enabled and configured. Skip the remaining
steps in this procedure and go to
page 79.
The existing lease pool and lease table are deleted and the AG 5000 reboots. The
17.
AG 5000 can issue IP addresses to any DHCP enabled subscriber who enters the
network.
78
.
or , as required.
Private Pool
and/or the
IP Upsell Pool
to return to the previous page.
"Managing the DNS Options {DNS}" on
AG 5000
by checking the
Default Pool
Back to Main DHCP
then click on the
Submit
button if
Reset
System Administration