Managing The Snmp Communities {Snmp - Nomadix AG 5000 User Manual

AG 5000

Managing the SNMP Communities {SNMP}

You can address the AG 5000 using an SNMP client manager (for example, HP
OpenView). SNMP is the standard protocol that regulates network management over
the Internet. To do this, you must set up the SNMP communities and identifiers. For
more information about SNMP, see
If you want to use SNMP, you must manually turn on SNMP.
From the Web Management Interface, click on
1.
The SNMP Settings screen appears:
Click on the check box for
2.
Enter the SNMP parameters (communities and identifiers), including:
3.
System Contact
System Location
Get (Read) Community
Set (Write) Community
Trap Community
Trap Recipient IP
System Administration
"Using an SNMP Manager" on page
Configuration
to enable this functionality.
SNMP Daemon
58.
, then
SNMP .
111