Defining The Fail Over Options {Fail Over - Nomadix AG 5000 User Manual

AG 5000

Defining the Fail Over Options {Fail Over}

Your product license may not support this feature.
Many large scale networks require fail-over support for all devices in the Public
access network. The AG 5000 allows two Nomadix Gateways to act as siblings,
where one device will take up the users should the other device become disconnected
from the network. As part of this functionality, the settings (except IP addresses)
between the two devices will be synchronized automatically.
From the Web Management Interface, click on
1.
The Fail Over screen appears:
Enable or disable the
2.
If you enabled Fail Over, define the
3.
Enter an IP address in the
4.
Define the port in the
5.
Click on the check box for
6.
If you are using RADIUS, it is recommended to add both Nomadix
gateways to the RADIUS server.
Click on the
7. Submit
reset all values to their previous state.
System Administration
feature, as required.
Fail Over
Sibling Status
Sibling IP Address
field.
Fail Over Port
Reboot after changes are saved?
button to save your changes, or click on the
, then
System FailOver .
(Primary or Secondary).
field.
Reset
button to
187