Nomadix AG 5000 User Manual page 104

Miscellaneous Options
In the "Miscellaneous Options" category, Enter a value for the time (in seconds)
4.
in the
Default User Idle Timeout
time elapses before the subscriber's session times out and they must login again.
The AG 5000 can reauthenticate "repeat" subscribers who return to the system
5.
within 720 hours. To enable this feature, click on the check box for
Automatic Subscriber Reauthentication
If you want to enable the URL redirection feature, click on the check box for
6.
Enable URL Redirection
For a Network Access Server (NAS), if you want to send a NAS identifier with
7.
your account access request, click on the check box for
then define the NAS identifier in the
To send the NAS IP address with your account request, click on the check box
8.
for
Send NAS IP
To send a NAS port type with your account request, click on the check box for
9.
Send NAS Port type , then
To send the Framed IP address with your account request, click on the check box
10.
for
Send Framed IP
If required, check the box for
11.
(to allow business policies that want to terminate the session at
Authorized
midnight of every day).
If required, check the box for
12.
reset the transmitted and received byte count for a subscriber once an
"accounting start" is sent). This function prevents counting Walled Garden traffic
if the billing plan is using bytes sent/received as a charge criterion.
If required, check the box for
13.
allocate a specific subnet to a user).
If required, check the box for
14.
display a post session "goodbye" page). The "goodbye" page can be defined as a
RADIUS VSA or be driven by the AG 5000's Internal Web Server (IWS).
If required, check the box for
15.
default 802.1q tag, click on the check box for
System Traffic
Changing the default tag number may result in a loss of connectivity.
Click on the
16. Submit
you want to reset all the values to their previous state.
100
field. This value determines how much "idle"
.
NAS identifier
.
define the NAS port in the
.
Enable Session-Terminate-End-Of-Day When
Enable Byte Count Reset On Account Start
Enable Radius Subnet Attribute
Enable Goodbye URL
Enable WAN 802.1q Attribute
and, if necessary, enter the tag number (see caution).
button to save your changes, or click on the
.
Send NAS identifier
field.
NAS Port Type
(if you want to
(if you want the system to
. To enable the
Enable Default 802.1q Tag for
Reset
System Administration
AG 5000
Enable
,
field.
(to
button if