Connecting The Hsg To The Customer's Network - Nomadix HotSpot Gateway HSG User Manual

H S G ™
OT POT ATEWAY

Connecting the HSG to the Customer's Network

Use this procedure to connect the HSG to the customer's network (after the start up
configuration parameters have been established).
Choose an appropriate physical location that allows a minimum clearance of 4cm
1.
either side of the unit (for adequate airflow).
Connect the HSG to the router, then connect the HSG to the customer's
2.
subscriber port.
To
Subscriber Port
Connect the power cord and turn on the HSG.
3.
Go to "Establishing the Basic Configuration for Subscribers" on page
4.
Installing the HSG
Rear Panel
Router
To
52.
51