Nomadix AG 5000 User Manual page 96

Post-paid PMS only: If you selected a Post-paid PMS option, you can define an
4.
(in minutes) and an
Idle Timeout
selections determine the thresholds when a "post-paid" hotel guest will be
automatically disconnected from the service.
Property Management Systems generally operate at different baud rates. You
must now select an appropriate baud rate for your chosen PMS.
Select the
5. Speed of PMS Interface
which baud rate to choose, select
default.
You must now select the
6.
the billing plans you established in
Options}" on page
Because some Property Management Systems do not allow you to enter
characters, you must enter these service descriptions as a numeric value only (no
characters or delimiters). The numbers must be entered in the form of a
"telephone number" which the selected PMS will interpret.
If the "phone number" field required by the PMS is shorter than 15
characters, only the first required number of characters will be
supplied.
Click on the
7. Submit
or click on the
state.
Based on the HOBIC interface standards, Nomadix, Inc. has also
certified interoperability with a number of other PMS and call
accounting solutions such as Ramesys' ImagInn, Xeta Virtual XL, and
Hilton's proprietary standard OnQ. This development effort is on-
going. For an up-to-date list of supported PMS systems, please contact
our Technical Support team. Refer to
page 259.
92
Idle Data Threshold
from the available list. If you are not sure
Not Sure
Type of Service Post Mappings
"Defining the Billing Options {Billing
151.
button to save your changes and restart the serial interface,
button if you want to reset all the values to their previous
Reset
(in bytes). These
and the system will attempt to use the
you require relative to
"Technical Support" on
System Administration
AG 5000