Nomadix AG 5000 User Manual page 57

AG 5000
When assigning a DHCP Relay Agent IP address for the DHCP Relay,
ensure that the IP address you use does not conflict with devices on the
network side of the AG 5000.
Although you cannot enable the DHCP relay and the DHCP service at
the same time, it is possible to "disable" both functions from the
Command Line Interface. In this case, a warning message informs you
that no DHCP services are available to subscribers.
Follow the on-screen instructions to set up your DHCP options. For example:
3.
S S
AMPLE CREEN
Configuration>dh
Enable/Disable IP Upsell
Enable/Disable DHCP Relay
Enable/Disable DHCP Server
Enter external Subnet-based DHCP Service
IP Upsell
DHCP Relay
External DHCP Server IP
DHCP Relay Agent IP
DHCP Server
DHCP Server Subnet-based
Server-IP
208.11.0.4 255.255.0.0
10.0.0.4
* Default IP Pool
DHCP IP Pools Configuration:
0 - Show IP Pools
1 - Add a new IP Pool
2 - Modify an IP Pool
3 - Remove an IP Pool
4 - Exit this menu
Select the DHCP Pool configuration mode
After setting up your DHCP options, the system must be rebooted for
your changes to take effect.
Installing the AG 5000
R
ESPONSE
[disabled
[disabled
[enabled
Disabled
Disabled
0.0.0.0
0.0.0.0
Enabled
Disabled
Server-Netmask Start-IP
208.11.0.5 208.11.0.7 20
255.255.255.0 10.0.0.5
]:
]:
]:
[disabled ]:
End-IP Lease Type IPUp
PRIV NO
10.0.0.250 30 PRIV NO *
[0]:
53