AG 5000
Adding a Route {Route Add}
This procedure shows you how to add a route into the AG 5000's routing table. This
is accomplished by establishing the route's destination IP address, and by setting the
gateway or router IP address by which the route's destination can be reached.
From the Web Management Interface, click on
1.
The Add Static Routes screen appears:
Enter the
2.
Destination IP
Enter the
3.
Gateway
Click on the
4.
Add
button if you want to reset all the values to their previous state.
Reset
System Administration
address of the route you want to add to the routing table.
IP address.
button to add this route to the routing table, or click on the
, then
System
Route Add .
195