Nomadix AG 5000 User Manual page 98

System administrators can set the properties for each room from the subscriber
2.
side of the AG 5000. The system automatically detects which port number the
administrator is using and allows them to enter the fields for the room
corresponding to the port they are using.
If required, click on the check box for
feature.
If you enabled In Room Port Mapping, you must assign a
3.
. You will need these when you perform port mapping from the
Password
subscriber side of the AG 5000.
Go to "In Room Port Mapping" on page 96
side of the AG 5000.
For security reasons, this feature should be disabled when in room port
mapping (from the subscriber side of the AG 5000) is completed.
Select
4. No Port Location Mapping
... or go to Step 5:
Select
5. 802.1Q one-way
device that understands VLAN IDs. These options tell the AG 5000 that the
device can process VLAN IDs to identify which port-location the information is
coming from, and how to bill it.
When assigning port-locations, the "port" is the VLAN ID (when using
802.1Q one-way or 802.1Q two-way).
... or go to Step 6 (next page):
94
In Room Port Mapping
to map rooms from the subscriber
if you are not using Port-based access.
or (VLAN IDs) if you are using a
802.1Q two-way
AG 5000
to enable this
and
Username
System Administration