Logging Out And Powering Down The System; Connecting The Ag 5500 To The Customer's Network - Nomadix AG 5500 User Manual

Logging Out and Powering Down the System

Use this procedure to log out and power down the AG 5500.
1. Enter l (logout) at the AG 5500 Menu.
Your serial session closes automatically.
2. Turn off the AG 5500 and disconnect the power cord.
3. Disconnect the serial cable between the AG 5500 and your computer.

Connecting the AG 5500 to the Customer's Network

Use this procedure to connect the AG 5500 to the customer's network (after the start up
configuration parameters have been established).
Choose an appropriate physical location that allows a minimum clearance of 4cm either
1.
side of the unit (for adequate airflow).
Connect the AG 5500 to the router, then connect the AG 5500 to the customer's subscriber
2.
port
50
Sample Screen Response:
AG 5500>l
Serial session 1 closing
AG 5500
Installing the AG 5500