Establishing Icmp Blocking Parameters {Icmp - Nomadix AG 5000 User Manual

AG 5000

Establishing ICMP Blocking Parameters {ICMP}

The AG 5000 includes the option to block all ICMP traffic from "pending" or "non
authenticated" users that are destined to addresses other than those defined in the
pass-through (walled garden) list. The default setting for this option is "disabled"
since ICMP pass-through is a useful end-user troubleshooting feature and also
required by certain smart clients (for example, GRIC).
From the Web Management Interface, click on
1.
The ICMP screen appears:
Click on the check box for
2.
disable) this feature, as required.
You can
3. Ping a host via the network port
the host you want to ping then clicking on the
Click on the
4. Submit
reset all values to their previous state.
System Administration
Block ICMP from pending users
by simply entering the IP address of
button to save your changes, or click on the
, then
System ICMP .
to enable (or
button.
Submit
Reset
button to
189