Setting Up Bandwidth Management {Bandwidth Management - Nomadix AG 5000 User Manual

Setting Up Bandwidth Management {Bandwidth Management}

The AG 5000 allows system administrators to manage the bandwidth for subscribers,
defined in Kbps (Kilobits per seconds) for both upstream and downstream data
transmissions. With the ICC feature enabled, subscribers can increase or decrease
their own bandwidth dynamically (by the minute, or on an hourly, daily, weekly, or
monthly basis), and also adjust the pricing plan for their service.
From the Web Management Interface, click on
1.
Management .
The Bandwidth Management screen appears:
If required, click the check box for
2.
If you enabled Bandwidth Management, enter the uplink and downlink speeds (in
3.
Kbps) in the appropriate fields.
Setting the uplink or downlink speeds to anything greater than 100,000
Kbps is meaningless, because communication with the AG 5000 is
established at 100 Mbps (100,000 Kbps).
If you made any changes to the settings on this screen, you must click the check
4.
box for
Reboot after changes are saved?
Click on the
5. Submit
on the button if you want to reset all the values to their previous state.
Reset
72
Bandwidth Management Enabled
(the AG 5000 must be rebooted).
button to save your changes and reboot the system, or click
, then
Configuration Bandwidth
.
System Administration
AG 5000