Nomadix AG 5000 User Manual page 203

AG 5000
Enter the
3. Internal Port
Enter a valid
4. MAC Address
Enter the
5. External IP Address
The External IP address field will default to the IP address of the AG
5000.
Enter the
6. External Port
Optional: Enter the
7.
to connect to the internal device from any network-side workstation.
Optional: Enter the
8.
want to connect to the device from any TCP/UDP port of a network-side
workstation.
Select the protocol (
9.
Click on the
10. Add
reset all values to their previous state.
For more information about Static Port-Mapping, see also:
"Displaying the Static Port Mapping Table {Static Port-Mapping}" on
page 126.
"Deleting Static Ports {Static Port-Mapping Delete}" on page
System Administration
reference.
.
.
reference.
. Leave this field set to zero if you want
Remote IP Address
reference. Leave this field set to zero if you
Remote Port
or ) from the pull-down menu.
TCP UDP
button to add this static port, or click on the button to
Reset
200.
199