Setting The System Date And Time {Time - Nomadix AG 5000 User Manual

AG 5000

Setting the System Date and Time {Time}

This procedure shows you how to set the system date and time.
From the Web Management Interface, click on
1.
The Set Date and Time screen appears:
If required, enter the new date and time parameters in the relevant fields:
2.
Year (####)
Month (1-12)
Day (1-31)
Hour (0-23)
Minute (0-59)
After entering new data for the final parameter (minutes), the system writes the
information into its BIOS, then displays the new date and time. The AG 5000
also allows you to enter a "Time offset from UTC." This parameter is the
Universal Coordinated Time, based on the ISO 8601 standard, and is used in
conjunction with RADIUS servers (for example, if the RADIUS server is setup
for a time zone that is different from the AG 5000).
If required, enter UTC offset values for
3.
fields and define whether this time is plus or minus from the
When finished, click on the
4.
button if you want to reset all the values to their previous state.
Reset
System Administration
Configuration
and
Hours Minutes
button to save your changes, or click on the
Submit
, then
Time .
in the appropriate
pull-down menu.
+/-
115