Tektronix MTX100A Service Manual page 77

MTX100A MPEG Recorder & Player Service Manual
27. After recording is completed, press the STOP button on the MPEG recorder
and player.
Checking the Record Operation (Serial Mode).
28. On the MTX100A Option 02, make the following settings:
Univ I/F menu
Format . . . . . .
File menu
Save . . . . . . . .
29. Open the Serial_LVDS.trp file on the MPEG recorder and player.
a. Select File > Open to open the Select File dialog box.
b. In the dialog box, navigate to the D:\Record_Files directory, and then
select the Serial_LVDS.trp file.
30. Select Play > Clock on the MPEG recorder and player to open the Clock
dialog box.
31. In the dialog box, set Data Rate to 40 Mbps.
32. Press the PLAY button on the MPEG recorder and player to start playing the
file.
33. Verify that the hierarchic view is displayed on the MTX100A Option 02
screen. In addition, verify that the bit rate display is 40 Mbps and the packet
size is 188 bytes.
34. Press the REC button on the MTX100A Option 02 to record the file.
35. After recording is completed, press the STOP button on the MPEG recorder
and player.
Checking signal acquisition for ECl and TTL Levels.
36. On the MTX100A Option 02, make the following settings:
Univ I/F menu
Level . . . . . . .
Format . . . . . .
37. Open the test40.TRP file on the MPEG recorder and player.
a. Select File > Open to open the Select File dialog box.
b. In the dialog box, navigate to the E: drive, and then select the
test40.TRP file.
Serial
D:\Record_Files\Serial_LVDS.trp
ECL
Parallel
Performance Verification
3-25