Tektronix MTX100A Service Manual page 76

Performance Verification
3-24
18. After recording is completed, press the STOP button on the MTX100A
Option 02.
Checking the Record Operation (Parallel Mode).
19. Press the REC button on the MTX100A Option 02 to display the Record
screen.
20. On the MTX100A Option 02, make the following settings:
Record menu
Source . . . . . . . . .
Record size . . . . .
Target . . . . . . . . .
Univ I/F menu
Level . . . . . . . . . .
Format . . . . . . . . .
Receive . . . . . . . .
Termination . . . . .
File menu
Save Mode . . . . .
Save . . . . . . . . . . .
21. Press the PLAY button on the MPEG recorder and player to display the Play
screen.
22. Open the Parallel_LVDS.trp file on the MPEG recorder and player.
a. Select File > Open to open the Select File dialog box.
b. In the dialog box, navigate to the E:\Record_Files directory, and then
select the Parallel_LVDS.trp file.
23. On the MPEG recorder and player, make the following settings:
Play menu
Data rate . . . .
Update . . . . . .
Source . . . . . .
24. Press the PLAY button on the MPEG recorder and player to start playing the
file.
25. Verify that the hierarchic view is displayed on the MTX100A Option 02
screen. In addition, verify that the bit rate display is 214 Mbps and the
packet size is 188 bytes.
26. Press the REC button on the MTX100A Option 02 to record the file.
Univ I/F
100 MB
RAM
LVDS
Parallel
Differential
On
Overwrite
D:\Record_Files\Parallel_LVDS.trp
214 Mbps
Off
RAM
MTX100A MPEG Recorder & Player Service Manual