Table of Contents
Advertisement
Chapter 1 Using the Operator Panel
Setting Resolution
You can set the default print resolution in three ways:
300 dpi, 600 dpi and Fast 1200 mode. The clarity of printed
characters and graphics becomes sharper in this order.
NOTE
Fast 1200 mode can only be set with PCL 6, KPDL or KPDL
(auto) emulation.
1
Press the MENU key.
2
Press the
or
Quality > appears.
Print Quality
3
Press the
key.
4
Press the
or
>Resolution appears.
>Resolution
Fast 1200 mode
5
Press the ENTER key. A blinking question mark (?)
appears.
>Resolution
? Fast 1200 mode
6
Select Fast 1200 mode or 300 dpi, 600 dpi using
the
or
key.
7
Press the ENTER key.
8
Press the MENU key. The message display returns to
Ready.
1-34
key repeatedly until Print
>
key repeatedly until
Advertisement
Table of Contents
